New Slim Shield Board Level Shields
Plymouth, MA.... Tech-Etch introduces new SlimShield, a low-profile, two-piece board level shielding line with a dimpled cover that snaps into etched holes on the fence and offers shield heights as low as to .060”. The photo etching process provides complete design freedom and fast delivery. Standard dimple tooling offers variable dimple location with excellent cover retention at very low cost. There is no tooling cost on standard two-piece designs. An optional flange for added rigidity is available on larger fence designs. Multi-cavity designs are achieved by incorporating internal fences enabling multiple components to be shielded with the same part. Mounting pins are offered in any configuration. There is no additional cost for holes and slots for heat dissipation, as well as logos and part numbers. A configurable PDF sales drawing for the new low-profile board level shields can be downloaded from the website.
Plymouth, MA....Tech-Etch has introduced a new Continuous Integrated Gasket for shielding honeycomb vents that offers better performance, reduced cost and the fastest production time. Continuous lengths of the high-performance BeCu gaskets are mechanically installed under the inner perimeter of the vent’s aluminum extrusion frame. No tooling is required to manufacture and attach the gasket to the honeycomb vents, resulting in reduced cost. After completion, the entire vent system is plated as one piece, so all honeycomb cells, the BeCu integrated gaskets as well as the frame are joined to increase conductivity and shielding effectiveness. The new gaskets are in stock and the efficient mechanical production method has reduced lead times. Tech-Etch manufactures custom and standard EMI shielded honeycomb vents and filters featuring strong, light-weight aluminum frames with various media options. In-house manufacturing and plating support prototype to high volume production while providing fast turnaround. Many RoHS compliant finishes are available.
Flexible Ferrite Sheets and Absorber
Two symmetrical contact bulbs - one with a conductive outer layer to make contact between the mating surfaces.
The other is a dedicated environmental seal, normally installed with the environmental segment closest to the source of outside influences.
For groove mount or pressure sensitive adhesive mounting.